• Automatic wall-mounted foam soap dispenser made of AISI 304 stainless steel, 0.8 mm thick and with a total capacity of 1 liter. Available in four different finishes (white, black, glossy and satin).
• Its functional, robust, and modern design perfectly complements Mediclinics' new range of washroom and bathroom accessories. This soap dispenser blends seamlessly into any room.
• The soap dispensers are suitable for high-traffic facilities and public use.
• Operates on 6 AA alkaline batteries (not included) or optionally with an AC adapter. The automatic soap dispenser, which can be connected to the mains power supply, is available under order number DJF0038A/B/C/CS-TRAFO.
• It is recommended to use foaming soaps with the following properties:
- Maximum alcohol content of 80%
- Density between 0.95 and 1.05 kg/dm3
- Use special foam products
Not suitable for foaming soaps containing methanol, chlorine, or solid or abrasive particles.
• The screws and plastic dowels required for mounting to a wall are included in the scope of delivery.
Components and materials
• DJF0038A: Stainless steel AISI 304, white epoxy.
• DJF0038AB: Stainless steel AISI 304, matte black epoxy.
• DJF0038AC: Stainless steel AISI 304, polished.
• DJF0038ACS: Stainless steel AISI 304, satin finish.
• COVER: made of AISI 304 stainless steel, 0.8 mm thick.
• WALL PLATE: made of AISI 304 stainless steel, 0.8 mm thick. The
Wall mounting is achieved using four stainless steel screws with a diameter of 4 mm (included in the scope of delivery) and the corresponding mounting hardware.
Plastic dowels with a diameter of 6 mm (also included in the scope of delivery).
• INTERNAL PLASTIC TANK: prevents oxidation and can be easily removed for cleaning and disinfection.
• INFRARED DETECTION: with a hand detection range of 5 cm.
• VALVE: Drip-proof and corrosion-resistant valve that dispenses 1.0 ml of soap per actuation. This anti-drip valve for dispensing foam soap is easily interchangeable with the valves of other soap dispensers in the same series.
• FOLDABLE COVER: for ease of use and speed of servicing. Opening on the top with included Mediclinics key for refilling soap.
• POWER: 6 AA alkaline batteries (not included) or optional AC adapter. The automatic soap dispenser, which is compatible with the electric version, is available under order number DJF0038A/B/C/CS-TRAFO.
The Mediclinics DJF0038Ais an automatic foam soap dispenser made of AISI 304 stainless steel with an infrared sensor, 1000 ml capacity, touchless operation – hygienic, economical in consumption, and offering excellent value for money.
Advantages
Foam soap instead of liquid soap: only approx. 0.4 g of soap per dosage (compared to 1–1.5 g for liquid soap dispensers) – significantly more economical in consumption.
Touchless infrared sensor (detection range 5 cm) – reduces cross-contamination during hand washing.
Anti-drip valve, 1.0 ml per dosage – no dripping, no soiling of the surface.
Removable plastic inner tank (polypropylene) – easy to clean and disinfect.
Refillable from above or interchangeable tank – quick refilling without tools.
Front viewing window for fill level control.
Operates with 6 AA batteries or optionally with a power adapter (order number DJF0038A-TRAFO).
Pin lock with pin key – secure access.
4 surfaces available from stock: Matte white, Matte black, Brushed stainless steel, Polished stainless steel.
Limitations
Batteries not included (6 × AA).
Power adapter to be ordered separately (DJF0038A-TRAFO).
Pin lock: less vandal-resistant than a cylinder lock – less suitable for high-risk locations.
Only suitable for foam soaps (max. 80% alcohol, density 0.95–1.05 kg/dm³) – no gel or liquid soap without valve replacement.
Variant Comparison
AME-DJF0038A – Matte white.
AME-DJF0038AB – Matte black.
AME-DJF0038ACS – Brushed stainless steel.
AME-DJF0038AC – Polished stainless steel. High gloss, shows fingerprints more clearly.